5 Series E39 530d (M57) SAL
Cut through cable clip (1).
Release wiring harness section (2).
Release screws (1).
Tightening torque,
refer to Technical Data 12 90 4AZ.
Remove electronics box cover (2).
Release locks on strip (1).
Remove strip (1) upwards.
Disconnect plug (2) on DDE control module.
Remove wiring harness section (3).
Remove plug (1) from DDE control module.
Separate plugs (2 and 3).
Disconnect plug (4) from preheating relay.
Remove wiring harness section (5) from electronics box.
RA Removing and installing engine (M57)
BMW AG - TIS
20.02.2013 11:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
