5 Series E39 530d (M57) SAL
All cars:
Pull plug (1) off pulse generator.
Unscrew bolt (1).
Tightening torque,
refer to Technical Data 13 62 8AZ.
Remove pulse generator.
Installation:
Prior to installation, apply a thin coat of petroleum jelly to
sealing ring (1).
Mount pulse generator and tighten down.
Switch on ignition.
Check function.
Interrogate fault memory of DDE control module.
Check stored fault messages.
Rectify faults and clear fault memory.
RA Replacing camshaft pulse generator (M57)
BMW AG - TIS
20.02.2013 12:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -