5 Series E39 535i (M62) SAL
11 62 065
Removing and installing/replacing exhaust
manifold, right (M62 VANOS from 9/98)
(Cylinder bank 1-4)
Unscrew and remove splash guard.
Remove exhaust system.
Remove right heat baffle plate.
Disconnect plug connection to Lambda control sensor.
Release screw connection at exhaust manifold.
Note:
Remove exhaust manifold towards bottom.
Installation:
Replace seals.
Beads of seals face the exhaust manifold.
Coat thread with copper paste -CRC-.
Replace nuts.
Tightening Torque,
refer to Technical Data 11 62 1AZ.
RA Removing and installing/replacing exhaust manifold, right (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -