5 Series E39 540i (M62) SAL
Release and remove grub screw (1).
Note:
The grub screw (1) secures the angle bracket (2) in the
cylinder head.
Detach guide rail from cylinder head.
Release cylinder-head bolts in sequence 10 ... 1.
Lift off cylinder head.
Installation
Installation of cylinder head is described separately from removal.
Clean sealing faces of cylinder head and engine block, if
necessary using wooden scraper to remove gasket debris. Ensure
that no gasket debris drops into the oil and coolant ducts.
Threaded bores in engine block must be free of dirt and oil
(danger of cracking).
RA Removing and installing left cylinder head (M62 VANOS from 9/98)
BMW AG - TIS
20.02.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
