5 Series E39 540i (M62) SAL
Seat new rubber seal in groove.
Installation:
Ensure that seal is correctly seated, then fit timing case cover
with inserted screw (1).
Note:
It is not possible to insert screw (1) after fitting the timing case
cover.
Installation:
Install screws (1) and fit flush with cylinder head.
Installation:
Remove outer and inner gasket from cylinder head cover.
Insert special tool 11 1 412 from special tool kit 11 1 410
in groove of cover and fit cylinder head cover.
RA Removing and installing timing case cover, top left (M62 up to 9/98)
BMW AG - TIS
20.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -