5 Series E39 540i (M62) SAL
Installation:
Install cover nuts (1) and tighten down uniformly in 1/2 turn
steps.
Tightening Torque,
refer to Technical Data 11 12 11AZ.
Note:
The timing case cover is pressed down onto level of cylinder
head by cylinder head cover.
Installation:
Tighten screws (1) on timing case cover in two passes.
Remove cylinder head cover and remove special tool 11 1 412.
Assemble engine.
RA Removing and installing timing case cover, top left (M62 up to 9/98)
BMW AG - TIS
20.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -