5 Series E39 540i (M62) SAL
11 42 020
Completely removing and installing,
sealing/replacing main flow oil filter (M62 /
S62)
Open or tighten down main flow oil filter cap with a wrench socket.
When the main flow oil filter cap is opened, engine oil flows from
the oil filter housing back into the oil sump.
Open main flow oil filter cap and take off.
Installation:
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Detach oil filter element (1) from main flow oil filter cover and
replace.
Installation:
Replace O-ring (2) and coat with oil.
Oil filter element (1) must snap audibly into place in main
flow oil filter cap.
Disconnect plug connection on oil pressure switch.
Unfasten bracket on oil lines.
Disconnect oil lines from oil filter housing.
Disconnect oil return line from oil filter housing.
Installation:
Replace sealing rings on oil return line.
Tightening Torque,
refer to Technical Data 11 42 5AZ.
RA Completely removing and installing, sealing/replacing main flow oil filter (M62
BMW AG - TIS
20.02.2013 12:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
