5 Series E39 540i (M62) SAL
Installation:
Replace O-ring and coat with oil.
Unscrew nuts (1).
Release screw (2) and disconnect ground connection from oil
filter housing.
Remove oil filter housing.
Installation:
When installing main flow oil filter housing, insert locating
pin (1) in locating bore (2).
RA Completely removing and installing, sealing/replacing main flow oil filter (M62
BMW AG - TIS
20.02.2013 12:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
