bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing Or Replacing Both Exhaust Manifolds On Left (M62 To 9_98|Page 881 > < 2 RA Removing And Installing_replacing Exhaust Manifold, Right (M62 VANOS From 9_98)
Page 1
background image

11 62 142

Removing and installing or replacing both
exhaust manifolds on left (M62 to 9/98)

(Cylinder bank 5-8)

Unscrew and remove splash guard.

Remove exhaust system.

Remove left heat baffle plate.

Unfasten nuts from left engine mount approx. 8 mm.

Installation:

Note guide lug (1).

Version 1

(acoustic cover screwed down)

Pry out sealing cap. Unscrew nuts.

Remove acoustic cover.

Version 2 

(acoustic cover with press-stud fastener)

Open press-studs (1 ... 4) one at a time, at the same time lift the
acoustic cover slightly. Once all four press-studs have been
opened, remove the acoustic cover.

Installation:

Position acoustic cover and press downwards until press-
studs (1 ... 4) click into place.

RA  Removing and installing or replacing both exhaust manifolds on left (M62 to 9/98

BMW AG - TIS

20.02.2013  12:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing Or Replacing Both Exhaust Manifolds On Left (M62 To 9_98|Page 881 > < 2 RA Removing And Installing_replacing Exhaust Manifold, Right (M62 VANOS From 9_98)