5 Series E39 540i (M62) SAL
Fit special tool 00 0 200 to special
tool 00 0 201 / 202 / 204 / 208 and attach.
Note:
The supports (1) of special tool 00 0 208 must make
contact with the screws on the side walls.
Caution!
Only attach engine to relevant suspension lugs.
Attach special tool 00 0 200 to the front suspension lug.
Tighten the screws (1 and 2).
Raise engine approx. 6-8 mm with special tool 00 0 200 on
front suspension lug.
Note:
With transmission removed, engine must also be raised on
flywheel end an additional 10 mm approx.
RA Removing and installing or replacing both exhaust manifolds on left (M62 to 9/98
BMW AG - TIS
20.02.2013 12:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -