5 Series E39 540i (M62) SAL
Unfasten cable connector (1).
Remove battery positive lead (3) from lead holders (2).
Unfasten cable clip (2).
Remove battery positive lead from lead holders (1).
Press press-stud fasteners (1...4) in succession and at same time
raise acoustic cover slightly.
Remove acoustic cover once all four press-stud fasteners have
been unlocked.
Installation:
Position acoustic cover and press downwards until press-stud
fasteners (1...4) click into place.
Remove seal caps (2) and release screws.
Remove cover.
Detach battery positive lead from battery positive support point (1).
RA Removing and installing or replacing battery positive lead (between starter, alt
BMW AG - TIS
20.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
