5 Series E39 540i (M62) SAL
18 00 020
Removing and installing complete exhaust
system (M62)
Unscrew and remove splash guard.
Disconnect plug connection for oxygen sensor/monitor on
left and right.
Support exhaust system with special tool 31 2 220.
(Weight approx. 48 kg)
Unfasten mounting on catalytic converter from back of body.
Release nut on rubber mount and remove suspension.
Cars without primary catalytic converter on exhaust manifold
only:
Unscrew exhaust catalytic converter from left and right sides of
exhaust manifolds.
Note:
The connections between exhaust manifolds and the catalytic
converter are only fitted with sealing rings on the inner tubes.
(1) Without sealing ring (outer)
(2) With sealing ring (inner)
RA Removing and installing complete exhaust system (M62)
BMW AG - TIS
20.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -