5 Series E39 540i (M62) SAL
31 12 148
Replacing rubber mounts on both traction
struts
Caution!
Always replace both rubber mounts!
Remove traction strut,
refer to 31 12 092.
Using a press and special tool 31 2 261 / 262, remove or
press-fit rubber mount.
Installation:
Rubber mount and pressure rod bore free of grease.
Marking on rubber mount points to mark on traction strut.
Special tool must abut with outer bearing sleeve when press-
fitting.
Maximum permitted torsion tolerance
±
3
°
.
Installation:
Overlap (A) = 12.5
±
0.2 mm
RA Replacing rubber mounts on both traction struts
BMW AG - TIS
20.02.2013 15:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -