5 Series E39 M5 (S62) SAL
When the engine is switched off, VANOS moves the camshafts to
a position which is advantageous to engine starting.
Caution!
Before the VANOS adjustment unit is removed, the camshafts
on cylinder bank 1 to 4 must be rotated back to their initial
position.
Rotate crankshaft in direction of rotation as far as ignition TDC
position of cylinder 1. Secure vibration damper in position with
special tool 11 2 300 .
Cylinder bank 1 to 4:
Remove oil line from VANOS adjustment unit.
Cylinder bank 1 to 4:
Fit special tool 11 7 130 to VANOS adjustment unit.
Connect compressed air (2 to 8 bar).
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
21.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
