5 Series E39 M5 (S62) SAL
Rotate crankshaft in direction of rotation as far as ignition TDC
position of cylinder 1. Secure vibration damper in position with
special tool 11 2 300 .
Note:
Signal rings of inlet and exhaust camshafts are different.
1)
Signal ring of inlet camshaft with one dowel pin
2)
Signal ring of exhaust camshaft with two dowel pins
Fit signal rings, align bores (1 and 2).
Install banjo bolt (1).
Grip camshaft at hexagon head and tighten down banjo bolt (1).
Tightening torque, refer to 11 31 13AZ .
Cylinder bank 5 to 8:
Remove oil line from VANOS adjustment unit.
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
21.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 19 -