5 Series E39 M5 (S62) SAL
Note:
Main bearing cap no. 5 can be identified by the recesses for
the stop disks of the thrust bearing.
Insert stop disks on both sides into grooves of main bearing cap
no. 5.
Checking main bearing clearance:
Do not twist crankshaft.
Fit special tool 00 2 590 (Plastigage Type PG 1) to the oil-
free crankshaft.
Position main bearing caps (1 to 5) so that retaining grooves of
main bearing shells are on one side.
Align main bearing cap flush with side of bearing seat.
RA Replacing all crankshaft main bearing shells (S62)
BMW AG - TIS
21.02.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -