5 Series E39 M5 (S62) SAL
Installation:
Align locating bore in vibration damper to dowel pin (1).
Installation:
Fit vibration damper and align to dowel pin.
Note:
Washers are fitted under screws (2).
Replace screws (2).
Attach special tool 11 0 270 to vibration damper.
Installation:
Tighten down screws on vibration damper with special
tool 00 9 120.
Tightening Torque,
refer to Technical Data 11 23 2AZ.
Installation:
Install screws with cover and belt pulley.
Tightening Torque,
refer to Technical Data 11 23 3AZ.
RA Removing and installing/replacing vibration damper (S62)
BMW AG - TIS
21.02.2013 07:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -