5 Series E39 M5 (S62) SAL
Open drain plug on radiator. Unfasten drain plug for coolant on
right engine block. Drain and dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque, refer to 11 11 5AZ.
Top up coolant. Vent cooling system and check for leaks.
Remove intake filter housing upper section with air-mass flow
sensor.
Remove water hose between radiator and thermostat housing.
Remove fan clutch with fan impeller and fan cowl.
Removal
The removal of the VANOS adjustment unit is described
separately from the installation. The assembly sequence for
removal and installation is different.
Remove oil line from VANOS adjustment unit.
RA Removing and installing, sealing/replacing right VANOS adjustment unit (S62)
BMW AG - TIS
21.02.2013 15:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
