5 Series E39 M5 (S62) SAL
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Cylinder bank 5 to 8:
Press and hold down toggle switch button 4 on special tool
12 6 050 .
At same time, rotate inlet camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and inlet camshaft
cannot be rotated further.
Cylinder bank 5 to 8:
Alternately press toggle switch buttons 2 and 1 several times on
special tool 12 6 050 .
Cylinder bank 5 to 8:
Press and hold down toggle switch button 2 on special tool
12 6 050 .
At same time, rotate exhaust camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and exhaust camshaft
cannot be rotated further.
RA Removing and installing/replacing right VANOS gear (S62)
BMW AG - TIS
21.02.2013 19:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 24 -
