5 Series E39 M5 (S62) SAL
11 36 080
Removing and installing/replacing toothed
shafts of VANOS gear on right (S62)
Special tools required:
•
11 2 300
•
11 7 120
•
11 7 130
•
11 7 150
•
11 7 200
•
12 6 050
•
12 6 410
•
12 6 411
(cylinder bank 1 to 4)
Read fault memory and make a documentary record.
Open drain plug on radiator. Unfasten drain plug for coolant on
right engine block. Drain and dispose of coolant.
Installation:
Replace drain plug sealing ring on engine block.
Tightening torque, refer to 11 11 5AZ.
Top up coolant. Vent cooling system and check for leaks.
Remove intake filter housing upper section with air-mass flow
sensor.
Remove intake air manifold.
Remove right cylinder head cover. This operation is described in
the work step Removing both cylinder head covers.
Remove all spark plugs.
Remove water hose between radiator and thermostat housing.
Remove fan clutch with fan impeller and fan cowl.
RA Removing and installing/replacing toothed shafts of VANOS gear on right (S62)
BMW AG - TIS
21.02.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -