5 Series E39 M5 (S62) SAL
Tighten the screws (1 and 2).
Raise engine with special tool 00 0 200 at front suspension eye
approx. 6 to 8 mm.
Note:
With transmission removed, engine must also be raised on
flywheel end approx. an additional 10 mm.
Unfasten screw connection on exhaust manifold.
Note:
First remove rear exhaust manifold, then front one: pull
downwards to remove.
Installation:
Replace seals.
Beads of seals face the exhaust manifold.
Coat thread with copper paste -CRC-.
Replace nuts.
Tightening torque,
refer to Technical Data 11 62 1AZ.
RA Removing and installing or replacing both left exhaust manifolds (S62)
BMW AG - TIS
21.02.2013 15:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -