5 Series E39 M5 (S62) SAL
12 63 500
Replacing temperature sensor for electronics
box (S62)
Switch off ignition.
Release retaining clips (1).
Caution!
The air duct can brake at the firewall if not carefully removed
and installed.
Carefully twist air duct (2) upwards until it is no longer locked in
firewall. Pull air duct (2) forwards and remove towards top.
Open locking bracket (1). Open cover of microfilter housing (2)
and unhook from hinges.
Open retaining clip (3).
Pull microfilter housing to right and lift out.
Installation:
Hook cover of filter housing into hinges in correct position.
Incorrect installation leads to sealing problems.
Release screws (1).
Tightening torque, 12 90 4AZ.
Remove cover (2) from electronics box.
RA Replacing temperature sensor for electronics box (S62)
BMW AG - TIS
21.02.2013 16:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
