5 Series E39 M5 (S62) SAL
Unscrew control unit (1) from bracket.
Release screws (2) and remove bracket.
Remove retaining ring (1).
Unhook lever.
Disconnect plug connection at top on instrument panel support.
Release screws on pedal travel sensor (1) with special tool 11 4
190.
Remove pedal travel sensor (1).
Note:
Always carry out pedal travel sensor basic adaptation when the
pedal travel sensor has been disconnected.
Procedures:
Select diagnosis of DME control unit.
Subsequent procedure in accordance with DIS instructions.
RA Removing and installing / replacing pedal travel sensor (S62)
BMW AG - TIS
21.02.2013 16:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
