5 Series E39 M5 (S62) SAL
Installation:
Observe installation position of pedal travel sensor (1).
Note lever positions (3) and (4).
If the pedal travel sensor or the lever (3) is replaced without
preassembly of these components, you must
make a template for 71
°
so that the lever (3) can be fitted in the
correct position.
Connect plug (2) at top to instrument panel support.
After installation, carry out above-mentioned function check.
RA Removing and installing / replacing pedal travel sensor (S62)
BMW AG - TIS
21.02.2013 16:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
