5 Series E39 M5 (S62) SAL
13 54 010
Performing throttle basic setting (S62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Note:
The basic setting of the throttles cannot be checked. It must
always be set.
Note:
Remove and install intake air manifold,
refer to 11 61 050.
Disconnect plug connections (1).
Unclip cables (2) from cable guides.
RA Performing throttle basic setting (S62)
BMW AG - TIS
21.02.2013 16:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
