5 Series E39 M5 (S62) SAL
17 11 100
Removing and installing/replacing coolant
expansion tank (S62)
Drain off and top up coolant,
refer to 17 00 005.
Remove upper section of right intake filter housing,
refer to 13 71 020.
Remove expansion rivets (1) from expansion tank.
Loosen hose clamps (2).
Remove connector from level sensor.
Release hose clamp on expansion tank.
Detach hose from expansion tank.
Pull out expansion tank in upward direction.
RA Removing and installing/replacing coolant expansion tank (S62)
BMW AG - TIS
21.02.2013 20:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -