5 Series E60 520d (N47) SAL
11 31 005
Checking camshaft timing (N47, N47S)
Special tools required:
•
11 5 320
•
11 6 480
•
11 8 760
Necessary preliminary tasks:
•
Remove cylinder head cover.
Crank engine with special tool 11 6 480 to ignition TDC position
of first cylinder.
Important!
Do not crank the engine back.
Remove protective cap of timing case cover.
Crank engine at centre bolt with special tool 11 6 480 .
Block crankshaft in TDC position of cylinder No. 1.
Important!
Do not turn the engine back.
Special tool 11 6 480 must be removed before engine is
started.
RA Checking camshaft timing (N47, N47S)
BMW AG - TIS
23.01.2013 16:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -