5 Series E60 520d (N47) SAL
The cam on the intake camshaft (E) points obliquely upwards at
cylinder No. 1.
The cam on the exhaust camshaft (A) points obliquely outward to
the left at cylinder No. 1.
The marking on exhaust camshaft gearwheel (A) must be aligned
with the marking on intake camshaft gearwheel (E).
Note:
See illustration.
Fit special tool 11 8 760 on exhaust camshaft.
Note:
Special tool 11 8 760 must lie flush on cylinder head.
If necessary, adjust camshaft timing.
Assemble engine.
Important!
Special tool 11 5 320 must be removed before engine is
started.
RA Checking camshaft timing (N47, N47S)
BMW AG - TIS
23.01.2013 16:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
