5 Series E60 520d (N47) SAL
Pay attention to lug for taper groove on chain sprocket (1) of the
high-pressure pump.
Position timing chain (1) on crankshaft sprocket.
Fit chain sprocket (2) on high-pressure pump.
Installation:
Pay attention to taper groove.
Screw in central bolt (1) of high-pressure pump.
Special tool 11 8 740 is not necessary.
Position guide rail (1).
Screw in mounting studs (2).
Tightening torque: 11 11 3AZ
.
RA Replacing both timing chains (M47)
BMW AG - TIS
23.01.2013 16:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
