5 Series E60 520d (N47) SAL
Place the camshaft sprocket with timing chain on the intake
camshaft such that bolts (1) are located in the centre of the slots.
Insert bolts (1).
Tighten bolts (1) to 10 Nm.
Release bolts (1) again by a 90
°
turn.
Install chain tensioner (1).
Tightening torque: 11 12 2AZ
.
Fit special tool 11 8 760 on exhaust camshaft.
Note:
Special tool 11 8 760 must lie flush on cylinder head.
Tighten down screws (1).
Tightening torque: 11 31 1AZ
.
RA Checking camshaft timing (N47, N47S)
BMW AG - TIS
23.01.2013 16:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -