5 Series E60 530i (N52K) SAL
51 34 171
Removing and installing/replacing rear left or
right door window glass (Security)
Necessary preliminary tasks:
•
Remove sound insulation in rear door
•
Remove outer window cavity cover strip
•
Remove inner window cavity cover strip
•
Remove roller blind for fixed door window glass at rear
Important!
The insides of the windows have a polycarbonate coating
which must not be damaged or scratched.
Clean with antistatic plastic cleaner* only.
* Sourcing reference: BMW Parts Service
Door window glass is rigidly installed with hexagon socket head
cap screws (1). Power window unit is not installed.
Slacken lock nut on hexagon socket head cap screws (1) at
front/rear, release hexagon socket head caps screws until door
window glass can be fed out towards top rear with special tool 51
3 010.
Installation:
In order to avoid damaging the door window glass, tighten the
hexagon socket head cap screws only to such an extent that the
door window glass rests parallel with and without play on the
upper stop. If necessary, check play by moving door window glass
with special tool 51 3 010. Tighten down lock nuts on hexagon
socket head cap screws again.
RA Removing and installing/replacing rear left or right door window glass (Security
BMW AG - TIS
22.02.2013 00:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
