5 Series E60 530i (N52K) SAL
Detach plastic cover (1) in direction of arrow, remove adhesive
residue.
Door window glass armour plating (1), plastic cover (2).
Remove rubber guide (1) and bonded plastic cover (2), remove
adhesive residue.
Installation:
Slide in rubber guide (1). Apply window glass adhesive in corner
profile (3) of plastic cover (2). Press plastic cover (2) into
groove of rubber guide (1). Now firmly stick plastic cover (2) to
door window glass armour plating. If necessary, check position of
joined parts for best possible seating and secure with adhesive
tape on door window frame.
RA Removing and installing/replacing plastic covers on rear door window frame (Secu
BMW AG - TIS
21.02.2013 23:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -