5 Series E60 530Li (N52) SAL
Repair solution,
threaded bolt
Expander rivet
Cable strap
51 11 1 908 077
32 41 1 112 282
Various repairs
M8 hexagon nut
M6 hexagon nut
M5 hexagon nut with
shim
07 11 9 904 024
07 12 9 904 859
07 12 9 904 381
M5 Helicoil thread insert
M6 Helicoil thread insert
M10 Helicoil thread insert
07 14 6 958 585
07 14 6 958 586
07 14 6 958 587
For a detailed depiction for using the repair elements, see below.
)* The required tools are featured on the Workshop Equipment Planning CD (WEP)
See also Aftersales Assistance Portal (ASAP) - Service/Technology - Workshop Equipment (Start BMW) - Shop
Workshop Equipment
All the repair elements for the weight-reduced aluminium front
end are depicted in the following.
Read contents of Body, General.
- Repair kit, lug, radiator bracket
Mark severance cut (1) in accordance with measurement a and
cut.
Measurement a = 63 mm from top edge, lug, radiator bracket.
Carry over holes from new part, drill and screw new part into
place.
- Threaded bolts, short and long
Drive through damaged threaded bolts (1) towards rear.
Insert new threaded bolts (1) and (2) in same position, turn if
necessary.
Peen threaded bolts (1) and (2) from front end with 2 mm
punch.
Note:
Cut off threaded bolt (2) before driving through.
Installation:
Grind off 3.5 mm of threaded bolt (2) at head on one side and
apply primer coating.
RA Overview of front end repair elements
BMW AG - TIS
21.02.2013 22:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -