5 Series E60 530Li (N52) SAL
- Screw, self-tapping
Grind off torn threaded bolts (1) until flush and apply primer
coating.
Important!
Do not damage aluminium surface.
Drill 5.5 mm dia. holes (2) at distance of approx. 8 mm in a
level plane.
Insert self-tapping screw.
Tightening torque 8 Nm.
- Helicoil thread insert
Thread repair with Helicoil thread insert can be used on the spring
support (1).
Read and comply with tool manufacturer's instructions.
- Helicoil thread insert
Thread repair with Helicoil thread insert can be used on the
bulkhead (1).
Read and comply with tool manufacturer's instructions.
- Helicoil thread insert
Thread repair with Helicoil thread insert can be used on the
front engine carrier bushings (1) and middle engine
carrier bushings (2).
Read and comply with tool manufacturer's instructions.
RA Overview of front end repair elements
BMW AG - TIS
21.02.2013 22:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -