5 Series E60 530Li (N52) SAL
-
Transport Mode/Pre-delivery check
-
CBS Correction Tester Data
-
Reset CBS
-
CBS Correction Vehicle Data
Service function: Transport Mode/Pre-delivery check
To be able to hand over a vehicle to the customer in proper working order, it is essential to execute the "Transport
Mode/Pre-delivery check" service function.
The following items are worked through during the pre-delivery check:
-
Deactivation of transport mode.
-
An adaptation process must be activated in order to determine the vehicle-specific mileage/kilometrage per
week. Transport and immobilization periods before the vehicle is delivered to the customer therefore have no
effect on the customer-specific weekly mileage/kilometrage.
The weekly mileage/kilometrage is used to control escalation from "green" to "yellow" (approx. 4 weeks before
"red") for maintenance scopes with remaining distances. The averaged mileage/kilometrage of the last 6 weeks
is taken into account here.
-
Coding or blanking out of the legally prescribed intervals for the statutory vehicle inspection and statutory exhaust
emissions test.
-
Input of the target dates for the statutory vehicle inspection and the statutory exhaust emissions test (automatic
or manual).
Automatic: By input of the date of first registration and of the time interval
Manual: By direct input of the target date
-
Entry of local, service-related phone numbers, depending on vehicle equipment specification (e.g. BMW Group
Mobile Service, BMW Hotline, customer's home dealer).
The country-specific phone numbers are displayed in the BMW diagnosis system as a reference text. The phone
numbers can simply be read off during the input prompt.
-
Reference to initialization of TeleService, depending on vehicle equipment specification.
-
Checking and if necessary setting of the on-board date for the vehicle.
-
Entry of the date for first registration of the vehicle.
-
Now clear the fault memory.
Note: Reducing input expenditure.
Standardized data are stored in the BMW diagnosis system (for repeated use) in the interests of minimizing
the time spent on making inputs in the garage/workshop. The standardized data can be changed with the
"CBS Correction Tester Data" service function.
Service function: CBS Correction Tester Data
Data are automatically stored in the vehicle with the "Pre-delivery check" service function.
The standardized data can be changed with the "CBS Correction Tester Data" service function.
The following standardized data can be changed:
RA Diagnosis for Condition Based Service
BMW AG - TIS
22.02.2013 04:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -