5 Series E60 M5 (S85) SAL
11 12 005
Removing and installing / sealing right
cylinder head cover (S85)
Necessary preliminary tasks:
•
Remove intake air manifold.
•
Remove rod-type ignition coils.
•
Disconnect plug connection for ion control unit.
•
Disconnect plug connection at camshaft sensors.
Release screw (1).
Lay ground strap (2) to one side.
Release screws along line (1).
Remove spark plug tube (1) in direction of arrow.
Installation:
Check rubber on spark plug tube (1) for damage; replace spark
plug tube (1) if necessary.
Apply a light coating of engine oil to spark plug tube (1) prior to
installation.
RA Removing and installing / sealing right cylinder head cover (S85)
BMW AG - TIS
22.02.2013 16:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -