bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
2 RA Removing And Installing _ Sealing Right Cylinder Head Cover (S85)|Page 296 > < 2 RA Removing And Installing _ Sealing Right Cylinder Head Cover (S85)

5 Series E60 M5 (S85) SAL

Page 2
background image

Installation:

Replace seal (1).

Align gasket (1) on cylinder head cover groove.

Press in gasket (1) so that it is free from tension.

Installation:

Clean seal residue from sealing surfaces.

Coat contact surfaces of joint (1) with Drei Bond 1209 (refer
to BMW Parts Service).

Installation:

Check decoupling element (1) for damage and replace if
necessary.

Fit cylinder head cover.

Align spark plug tubes.

Tighten down all retaining elements diagonally from inside to
outside.

RA  Removing and installing / sealing right cylinder head cover (S85)

BMW AG - TIS

22.02.2013  16:07

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing _ Sealing Right Cylinder Head Cover (S85)|Page 296 > < 2 RA Removing And Installing _ Sealing Right Cylinder Head Cover (S85)