5 Series E60 M5 (S85) SAL
13 54 045
Removing and installing/sealing a throttle
valve assembly (S85)
Special tools required:
•
34 3 171
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Follow instructions on connecting and disconnecting battery
•
Disconnect battery negative lead and cover
•
Remove intake air manifold
Removing throttle valve assembly 6:
Unfasten screws. Disconnect injection pipe (1) from throttle valve
assembly.
Remove pull rod (2).
Unlock plug (3) and remove.
RA Removing and installing/sealing a throttle valve assembly (S85)
BMW AG - TIS
22.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
