5 Series E60 M5 (S85) SAL
Unclip lines (1).
Release bolts and remove cover (2).
Tightening torque 13 54 2AZ
.
Release screw (1).
Tightening torque 13 54 3AZ
.
Release screw connections (2) of actuating levers. Grip screw
and turn nut in the process.
Remove screws from bores.
Installation:
-
Use screws and nuts only once.
-
Only turn nuts and grip screws.
-
Tightening torque 13 54 1AZ
.
Unclip pull rod (3) from actuating lever.
Slide actuating shaft (5) in direction of arrow.
Release nuts (4) with special tool
34 3 171 and remove
throttle valve assembly (6).
Installation:
Clean sealing surface (1). Note correct position of adapter
sleeves (2).
RA Removing and installing/sealing a throttle valve assembly (S85)
BMW AG - TIS
22.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
