5 Series E60 M5 (S85) SAL
Installation:
Clean sealing face on cylinder head.
Replace O-ring (1) on cylinder head.
Note:
Perform basic throttle valve setting
Removing throttle valve assembly 5:
Procedure is described in the repair instruction "Removing right
Hall sensor".
Removing throttle valve assemblies 1 - 4 and 7 - 10:
Necessary preliminary tasks:
Remove throttle valve assembly
RA Removing and installing/sealing a throttle valve assembly (S85)
BMW AG - TIS
22.02.2013 17:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
