5 Series E60 M5 (S85) SAL
17 11 370
Removing and installing/replacing cooling
loop for power steering
Necessary preliminary tasks:
•
Remove fan cowl with electric fan
•
Draw off hydraulic fluid
Recycling:
Catch and dispose of hydraulic fluid.
Observe country-specific waste-disposal regulations.
Unlock and disconnect left and right oil lines.
Release screw.
Important!
Risk of damage to connecting pipes.
Carefully press cooling coil on left towards front, then clip out on
right and remove.
Installation:
Bleed power steering.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
22.02.2013 18:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
