5 Series E60 M5 (S85) SAL
17 21 150
Removing and installing/replacing engine oil
cooler (S85)
Necessary preliminary tasks:
•
Remove front bumper trim
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Recycling:
Engine oil escapes when oil lines are released. Catch and dispose
of emerging engine oil.
Observe country-specific waste-disposal regulations.
Unfasten nut.
Detach oil line from engine oil cooler.
Catch and dispose of escaping oil.
Installation:
Replace sealing ring.
RA Removing and installing/replacing engine oil cooler (S85)
BMW AG - TIS
22.02.2013 18:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
