5 Series E60 M5 (S85) SAL
23 42 562
Replacing clutch actuator (GS7S47BG SMG)
Important!
Before working on hydraulic system:
-
Reduce pressure in hydraulic system by means of
Service Functions in DIS Tester (Replacement and
Repair)
-
Disconnect hydraulic pump relay in electronics box
Do not reconnect relay for entire duration of repair work
Important!
After working on hydraulic system:
-
Perform bleeding using DIS Tester, refer to Service
Functions in DIS Tester (Replacement and Repair)
Necessary preliminary tasks:
•
Remove transmission
•
Remove clutch release bearing/lever
Release banjo bolts (1).
Tightening torque 21 52 10AZ
.
Installation:
Replace seals.
RA Replacing clutch actuator (GS7S47BG SMG)
BMW AG - TIS
22.02.2013 19:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -