5 Series E60 M5 (S85) SAL
32 41 312
Replacing suction line with cooler return line
for power steering (S85)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove reinforcement plate
•
Remove right intake filter housing
Loosen hose clamps (1).
Disconnect suction line with cooler return line (2) from fluid
reservoir.
Installation:
Make sure hydraulic lines are laid without tension and with
sufficient spacing to adjoining components.
RA Replacing suction line with cooler return line for power steering (S85)
BMW AG - TIS
22.02.2013 20:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -