5 Series E60 M5 (S85) SAL
Expose suction line with cooler return line up to cutting line on
engine carrier.
Release quick-connect coupling (1) and seal hydraulic lines with a
suitable plug.
Release ear clamp (2) and remove suction line (3) with cooler
return line in upward direction.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Remove alternator drive belt tensioner.
Expose suction line up to vane pump.
Release hose clamp (1) and detach suction line (2) from vane
pump.
RA Replacing suction line with cooler return line for power steering (S85)
BMW AG - TIS
22.02.2013 20:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
