5 Series E61 520d (M47T2) TOUR
13 53 560
Removing and installing/replacing pressure
sensor on pressure accumulator of fuel
injection system (M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Remove acoustic cover at front
Important!
The pressure sensor can be screwed back into place a
maximum of 10 times.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing/replacing pressure sensor on pressure accumulator of fue
BMW AG - TIS
25.01.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -