5 Series E61 520d (M47T2) TOUR
Unlock plug (1) and remove.
Grip pressure sensor (4) at hexagon head (2).
Release hexagon screw connection (3) on pressure accumulator.
Installation:
Check sealing faces, replace pressure sensor if deformed or
damaged.
Secure position of pressure sensor (4) and grip at hexagon
head (2).
Tighten down hexagon screw connection (3).
Tightening torque 13 53 9AZ
.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing pressure sensor on pressure accumulator of fue
BMW AG - TIS
25.01.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
