6 Series 645Ci (N62) Coupe
Check dowel sleeves (1) for damage and correct installation
position.
Note:
Bearing caps are marked in graphic with R E2 to R E5.
Fit bearing caps R E2 to R E5.
Note:
Initially tighten special tool 11 9 473 without play only.
Secure bearing bracket and bearing cap with nut (special tool
11 9 473 ).
Note:
The mounting of the bearing bracket described later can only be
performed if the first bearing of the inlet camshaft is aligned with
special tool 11 9 472 .
Fit special tool 11 9 472 as shown in graphic and align inlet
camshaft.
RA Removing and installing/replacing left inlet camshaft (N62 from 9/03 and N62TU)
BMW AG - TIS
18.01.2013 05:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -