6 Series 645Ci (N62) Coupe
54 10 120
Replacing seal for glass slide/tilt sunroof lid
Necessary preliminary tasks:
•
Remove glass slide/tilt sunroof lid
Note:
Follow repair instructions for bonded seals on glass slide/tilt
sunroof.
Detach seal (1) for glass sunroof from body.
Installation:
Clean bonding surface with adhesive remover (sourcing
reference: BMW Parts Service).
Partially pull off protective film from adhesive tape (2).
Press seal (1) without stretching (squashing).
Stick on seal (1) in stages.
Important!
Do not touch bonding surface.
Surface temperature
≥
20
°
C
Incorrect bonding of the seal will result in leakage.
RA Replacing seal for glass slide/tilt sunroof lid
BMW AG - TIS
18.01.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
