6 Series M6 (S85) Coupe
Allow engine at normal operating temperature to run at idle for
1 minute.
•
Pre-delivery inspection / engine replacement
Carry out distance travelled reset only with the BMW diagnosis
system.
•
Engine oil service!
Distance travelled RESET can be carried out with the BMW
diagnosis system or with the instrument cluster.
An exact measurement of the engine oil fill quantity can be read
out via the BMW diagnosis system in the DME in the test module
(Oil condition measurement).
Top up engine oil.
•
Overfilling of engine oil
Start engine and run at idle (engine oil temperature
≥
70
°
).
Run engine at idle speed.
Keep pressing on-board computer button on direction indicator
lever until oil level reading can be read off in instrument display.
Press on-board computer button for longer than 3 seconds to
reset the display value.
Run engine at idle until the oil level is determined again (engine oil
temperature of greater than 70
°
C).
The required oil temperature for an engine oil change is thus
achieved.>
Note:
An overfill value of up to 0.5 litre can be displayed in the
instrument cluster.
Further overfilling of more than 0.5 litre can be read out via the
BMW diagnosis system.
The BMW diagnosis system can display overfilling of up to
3.5 litres.
If overfilling is suspected, we recommend that the oil filling be
corrected with the BMW diagnosis system.
Select following steps on BMW diagnosis system:
-
Complete vehicle
RA Engine oil service (S85)
BMW AG - TIS
19.01.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
